April 5-8, 2022 | Las Vegas, Nevada USA

Online New Product Gallery

By submitting a product for the gallery, your company consents to the terms below. 

Terms:

Products must qualify as new as defined below:

A product qualifies as new if it is manufactured or exclusively distributed by a company and was introduced to the marketplace since January 2021.

OFFICIAL RULES

Set forth below are a list of rules (the “Rules”) applicable to the Online New Product Gallery being sponsored by International Tile Exposition, a joint venture t/a Coverings (“Coverings”). By submitting any materials to Coverings for use with respect to the Online New Product Gallery (the “Materials”), you acknowledge and agree to each of the following terms:

You must be a Coverings 2022 exhibitor to enter new products in the Online New Product Gallery. If you submit more than one product into the online gallery, all rules below apply to all product entries.

The product must be new in 2021. “New” means the product must have been first sold at any level of distribution since January 1, 2021. All new product entries are subject to approval. Coverings reserves the right to remove/disqualify any product that it believes does not qualify as new.

The number of product submissions per exhibitor is limited to (7) seven.

There is no entry fee to submit a product for the Online New Product Gallery.

The Online New Product Gallery will be available online on the website and mobile app.

Coverings may in its sole discretion elect not to include a product in its 2022 Online New Product Gallery.

You grant a perpetual royalty free license to Coverings for the use of the Materials as part of the Online New Product Gallery.

Coverings may make any stylistic edits to submission entries that it deems to be appropriate, in its commercially reasonable judgement.

Any legal dispute relating to these Rules or the Online New Product Gallery will be resolved by Arbitration in Arlington, Virginia before a single arbitrator under the Commercial Arbitration Rules of the American Arbitration Association.

In no event shall the aggregate liability of Coverings to you with respect to the Online New Product Showcase exceed $500.00.

In no event shall any joint venture member of Coverings have any direct liability to you with respect to the Online New Product Gallery with your recourse being limited solely to the assets of Coverings.

Ferrari & Cigarini Srl.

Maranello,  MO 
Italy
http://www.ferrariecigarini.com
  • Booth: N935


100% MADE IN ITALY combining innovation and experience

FERRARI & CIGARINI designs and manufactures machines and systems for the production of mosaic pieces, slabs, strips, skirting tiles, bull-nose and stairs in various materials such as marble, ceramic, stone, brick and glass. 
The company also offers robotised free-standing elements to automate the feeding system, the unwrapping system and the palletization for cutting, profiling, rectifying, honing and lapping lines.
Visit our Booth N935 to see TMC/1, MGP/5 and MTB/5 in operation.

TMC/1 - AUTOMATIC CUTTING MACHINE
TMC/1 is an automatic machine for cutting, antislip incisions, pre-cutting and special cutting such as: mosaics, triangles, diamonds and rhombuses. TMC/1 is able to work with marble, granite, gres porcelain, single and double firing and brick. 

MGP/5 - AUTOMATIC MACHINE FOR STEPS AND EDGING
MGP/5 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials. 
MGP/5 is a revolutionary model that allows two different types of machining with just one automated, compact machine:
- a 45° bevel for creating steps.
- edging for skirting, doorsteps and window sills, with bullnose and half bullnose edges.

MTB/5 - AUTOMATIC MACHINE FOR CUTTING AND SKIRTING (ALL IN ONE)
MTB/5 is the first and only compact, automatic belt machine able to carry out in a single passage and with just one movement of the piece,both the cutting and the profiling of the skirting! 

TMC/1, MGP/5 and MTB/5 are COMPACTLINE MACHINES, that have been designed to guarantee the same qualitative standards, already consolidated in the industrial machines, applying the same know-how on smaller and easy to use machineries.
COMPACTLINE is proposed, in particular, for showrooms, workshops and resellers of ceramics, marble natural stone and building materials who, through the use of these machines, would be able to provide a further service to their customers, cutting the delivery times in half by being able to create directly slabs, mosaics, skirting, special pieces, jolly, polished marble plinths in straight edge, half bullnose, bullnose.

For over 50 years, Ferrari & Cigarini has been committed to offering optimal solutions in the world of ceramics and similar products, always attentive to new technologies and maintaining the highest standars of quality.

 Videos

FERRARI e CIGARINI

 Show Specials

  • We are offering SPECIAL PRICE for new, demo and completed refurbished/guaranteed cutting and profiling machines NOW AVAILABLE INSIDE THE U.S.

    Contact us for more information sales.dpt@ferrariecigarini.com -  c.llerena@ferrariecigarini.mx - Call us (956) 404 – 3342

 Press Releases

  • DISCOVER THE BENEFITS OF COMPACTLINE MACHINES by FERRARI&CIGARINI
    Compactline machines are designed for multi-disc cutting, edge profiling and rectifying. They are easy to use, require minimal space and little manpower.
    FOR WHOM? It is the ideal solution for ceramic, marble, stone and brick laboratories, retailers and showrooms.
    WHAT FOR? It allows to realize internally and in a very short time strips, mosaics, skirting boards, special pieces, jolly edges, plinths with flat edge, half-bullnose, bullnose.

    WHAT ARE THE BENEFITS OF COMPACTLINE MACHINES?
    Customization of special pieces
    Direct quality control
    Just in Time samples
    Faster production time
    Faster delivery time
    Better service
    Cheaper raw material
    Profit Gain

 Products

  • TMC/1 Cutting Machine for ceramic, marble, brick
    Automatic machine for cuts, antislip incisions, pre-cut and special cut such as: mosaic, triangle, rombhus. Able to work with marble, granite, gres porcelain, agglomerated, brick and single-double firing....
     

    • TMC/1 - MULTIPLE AUTOMATIC CUTTING MACHINE WITH 1 HEAD

    PATENTED

    Automatic machine for cuts, antislip incisions, pre-cut and special cut such as: mosaic, triangle, rombhus. Able to work with marble, granite, gres porcelain, agglomerated, brick and single-double firing.

    ADVANTAGES OF TMC SYSTEM
    - On the shaft of motor-spindle it is possible to mount till 4 cutting blades, divided by spacers and flanges, in order to obtain different sizes and multiple cuts contemporarly.
    - The motorized conveyor belt improves the working quality and allows the production of pieces continuously.
    - The guide positioned on motor side and the pressor bar guarantee, during working phase, a strong stability and an high level of finishing piece.
    - All adjustments are facilitated by the use of handwheels and they do not require the use of tools.
    - A lateral roller allows to lay the big sizes to be worked.
    SPECIAL EQUIPMENT FOR MOSAIC CUTTING:
    On the shaft of motor-spindle it is possible to mount a mosaic kit with 11 cutting blades in order to obtain mosaics on a maximum thickness of 9 mm.
  • MTR Cutting Machine for ceramic, marble & brick
    Automatic machine for cuts, antislip incisions, pre-cut and special cut such as: mosaic, triangle, rombhus. Able to work with marble, granite, gres porcelain, agglomerated, brick and single-double firing. ...
     

    • MTR 500/2 ROBUSTUS - CUTTING MACHINE WITH 2 HEADS

    NOVELTY
    Automatic machine for multiple linear cutting with diamond discs. Suitable for cutting ceramic tiles of any kind, marble, granite, glass and bricks.

    ADVANTAGES OF MTR 500/2 ROBUSTUS
    - Side opening for large sizes.
    - Double hyper-static lateral support of the motor shafts for stability and anti-vibration.
    - Autonomous water recycling and / or possibility of connection to general recycling system.
    - 500 mm cutting belt.
    - Possibility to have 1 or 2 cutting heads on the same frame.
  • MPM/6 Edging machine for ceramic & marble
    MULTIPLE AUTOMATIC PROFILING MACHINE WITH 6 HEADS Ideal for processing skirting board, jolly, plinths, threshold, window sill, flat edge, bullnose and half bullnose of marble, granite, gres porcelain, single and double firing, agglomerates, etc...
     

    • MPM/6 - MULTIPLE AUTOMATIC PROFILING MACHINE WITH 6 HEADS

    PATENTED

    Automatic machine with 6 motorspindles to work with 6 different grinding wheels contemporary reducing the working time.
    Ideal for processing skirting board, jolly, plinths, threshold, window sill, flat edge, bullnose and half bullnose of marble, granite, gres porcelain, single and double firing, agglomerates, etc.

    ADVANTAGES OF MPM/6 SYSTEM
    - Nr 6 motorspindles allow to work with 6 different wheels reducing the working time.
    - The motorized conveyor belt improves the working quality and allows the production of pieces continuously.
    - The guide positioned on motor side and the pressor bar  guarante, during  working phase, a strong stability and an high level of  finishing piece.
    - All adjustments are facilitated  by the use of handwheels and they do not require the use of tools.
    - A lateral roller allows to lay the big sizes to be worked.
    - Possibility to mount also 1 or more inclined heads at 45° for special works.
    - MPM/6 has more speed of material progress and it allows to optimize the cost of tools.

  • MGP/5 Machine for making steps and edges
    MGP/5 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials....
     

    • MGP/5 - AUTOMATIC MACHINE FOR STEPS AND EDGING

    NOVELTY

    MGP/5 is the new automatic machine for steps and edging on ceramic, gres porcelain, marble, granite and agglomerate materials.
    It is a revolutionary model that allows two different types of machining with just one automated, compact machine:

    -    a 45° bevel for creating steps.
    -    edging for skirting, doorsteps and window sills, with bullnose and half bullnose edges.
     
    MGP/5 consists of 5 motor-spindles for tools, which can be angled to create a 45° bevel for steps or adjusted to an upright position for creating edges.
    MGP/5 allows to simultaneously operate five different grinding wheels and cut down working time.
  • MBJ Skirting board machine for ceramic and marble
    MBJ - MACHINE FOR SKIRTING BOARD AND JOLLY MBJ is a skirting machine with 5 heads adjustable at 45°/90° suitable for creating 45° and skirting on marble, granite, single and double-fired and porcelainized tiles....
     

    • MBJ - MACHINE FOR SKIRTING BOARD AND JOLLY

    MBJ is a skirting machine with 5 heads adjustable at 45°/90° suitable for creating 45° and skirting on marble, granite, single and double-fired and porcelainized tiles.
  • MVB/5 Cutting+Profiling machine for ceramic,marble
    MVB/5 AMINEUS - AUTOMATIC MACHINE FOR KITCHEN AND BATHROOM TOPS, STEPS, BULLNOSE...
     

    • MVB/5 AMINEUS - AUTOMATIC MACHINE FOR KITCHEN AND BATHROOM TOPS, STEPS, BULLNOSE

    NOVELTY

    The new MVB/5 is an automatic machine able to carry out both the cutting and the profiling of skirting pieces, doorsteps and window sills, with bullnose and half bullnose edges, in a single passage and with just one movement of the piece. Alternatively, it can make45° mitering for production of kitchen and bathroom top and steps.

    MVB/5 makes the production of high quality elements possible on ceramic, gres porcelain, marble, granite and agglomerate materials, in a fast and simple way, with just one automated compact machine

  • MIR/L Glueing machine for mosaics
    MIR 001/L5 - SEMI-AUTOMATIC GLUEING MACHINE IN LINE IN SINGLE AND DOUBLE REEL...
     

    • MIR 001/L5 - SEMI-AUTOMATIC GLUEING MACHINE IN LINE IN SINGLE AND DOUBLE REEL

    Machines for the automatic gluing of tiles, marbles and stones of any type onto paper mesh or glass fibre support.
    The gluing operation is carried out in automatic mode when the operator has completed the pieces composition onto suitable trays or templates provided on the conveyor of the gluing machine.
    MIR gluing machines are produced in 5 models based on the requested production.
  • COMPACTLINE MACHINES
    COMPACTLINE MACHINES are the ideal solution for ceramic, marble, stone and brick laboratories and showrooms to realize in a very short time strips, mosaics, skirting boards, special pieces, jolly edges, plinths with flat edge, half-bullnose, bullnose....

    • Compactline machines are designed for multi-disc cutting, edge profiling and rectifying. They are easy to use, require minimal space and little manpower.
    FOR WHOM? It is the ideal solution for ceramic, marble, stone and brick laboratories, retailers and showrooms.
    WHAT FOR? It allows to realize internally and in a very short time strips, mosaics, skirting boards, special pieces, jolly edges, plinths with flat edge, half-bullnose, bullnose.

    WHAT ARE THE BENEFITS OF COMPACTLINE MACHINES?
    Customization of special pieces
    Direct quality control
    Just in Time samples
    Faster production time
    Faster delivery time
    Better service
    Cheaper raw material
    Profit Gain

Categories

Products
  • Equipment & Machinery - Chamfering
  • Equipment & Machinery - Cutting
  • Equipment & Machinery - Edging
  • Equipment & Machinery - Polishing
  • Equipment & Machinery - Profiling
    • Loading ...

    :
    :


    Legend
    Available Timeslot
    Scheduled Appointment
    Personal Appointments
    Appointment Request
    Blocked Timeslot
    Restricted Timeslot
    Cancelled
    Declined
    For technical assistance with this webpage please click here. For all other inquiries, please contact show management.