April 5-8, 2022 | Las Vegas, Nevada USA

Online New Product Gallery

By submitting a product for the gallery, your company consents to the terms below. 

Terms:

Products must qualify as new as defined below:

A product qualifies as new if it is manufactured or exclusively distributed by a company and was introduced to the marketplace since January 2021.

OFFICIAL RULES

Set forth below are a list of rules (the “Rules”) applicable to the Online New Product Gallery being sponsored by International Tile Exposition, a joint venture t/a Coverings (“Coverings”). By submitting any materials to Coverings for use with respect to the Online New Product Gallery (the “Materials”), you acknowledge and agree to each of the following terms:

You must be a Coverings 2022 exhibitor to enter new products in the Online New Product Gallery. If you submit more than one product into the online gallery, all rules below apply to all product entries.

The product must be new in 2021. “New” means the product must have been first sold at any level of distribution since January 1, 2021. All new product entries are subject to approval. Coverings reserves the right to remove/disqualify any product that it believes does not qualify as new.

The number of product submissions per exhibitor is limited to (7) seven.

There is no entry fee to submit a product for the Online New Product Gallery.

The Online New Product Gallery will be available online on the website and mobile app.

Coverings may in its sole discretion elect not to include a product in its 2022 Online New Product Gallery.

You grant a perpetual royalty free license to Coverings for the use of the Materials as part of the Online New Product Gallery.

Coverings may make any stylistic edits to submission entries that it deems to be appropriate, in its commercially reasonable judgement.

Any legal dispute relating to these Rules or the Online New Product Gallery will be resolved by Arbitration in Arlington, Virginia before a single arbitrator under the Commercial Arbitration Rules of the American Arbitration Association.

In no event shall the aggregate liability of Coverings to you with respect to the Online New Product Showcase exceed $500.00.

In no event shall any joint venture member of Coverings have any direct liability to you with respect to the Online New Product Gallery with your recourse being limited solely to the assets of Coverings.

Noble Company

Spring Lake,  MI 
United States
http://www.noblecompany.com
  • Booth: N3062


The Leader in Sheet Membranes and Shower Products

Proven performance since 1946.  Noble Company has established a reputation of providing quality, innovative products for the tile and plumbing industries. Identifying problems and developing solutions that add value and exceed customer expectations has been the ongoing mission of our company. For over 55 years, Noble Company has pioneered the use of sheet membranes in the tile and stone industry. At the heart of all Noble systems is a core layer of Chlorinated Polyethylene (CPE), an inherently flexible elastomeric sheet that will not rot, crack, or deteriorate due to microorganisms.  Noble sheet membranes are available for waterproofing, crack isolation, and sound reduction. NobleSeal® sheet membranes and shower accessory products save time and money, are easy to install, and provide quality solutions to prevent costly failures. All Noble products are made in the U.S.A.  View Product videos, details, and instructions on-the-go with our free Mobile App – Download from Google Play or Itunes.

Brands: NobleSeal TS, CIS, SIS; Noble Deck; AquaSeal; Chloraloy; AquaBlue; PVC Pan Liner; ProBase; PRO-SLOPE; Niches, Benches, Curbs; FreeStyle Linear & Thin-Bed Drains; NobleBond EXT; NobleBond 21


 Products

  • Noble Deck™ Pro
    NobleDeck Pro takes the features and benefits of Noble's proprietary ProBase II honeycomb composite base and moves it outside. These 4'x4' panels are pre-waterproofed to provide for a quick, worry-free waterproof installation on an exterior deck....
     

  • Noble Deck™ Pro are single-slope exterior base panels for tile and stone installations. The panels are based on the proprietary Noble Company ProBase II Honeycomb composite system, which provides industry leading compressive strength. These panels can be installed quickly and easily with modified thin-set mortar of NobleBond EXT to provide code-required 1/4" per foot slope to edge.

    This provides a lightweight installation on the sub-structure, while also offering superior impact resistance. The base panels are pre-waterproofed with Noble Deck™ and have an integral over-flap on two edges to flash to the next panel. This reduces installation time and assures shingle overlapping of the waterproofing material from the house to the edge of the deck.

  • AquaBlue™
    The perfect complement to the 50-year history of Noble Sheet Membranes. AquaBlue by Noble Company provides an easy to apply liquid waterproofing membrane for applications where an alternate to sheet waterproofing may be favored....
     

  • AquaBlue™ is a ready-to-use liquid waterproofing membrane appropriate for interior tile and stone applications. AquaBlue applies quickly and easily to the substrate surface, and darkens when dry, helping to ensure total coverage when applying the next coat. Achieve full system warranty when used with Noble Sheet Membranes.  

    AquaBlue is available in 1.65 gallon pails and 3.3 gallon pails which are rectangular, making it easier to use a roller with the pail. AquBlue Flashing Mesh is also available for flashing and seaming applications.

    AquaBlue has outstanding performance characteristics including a very favorable perm rating.

  • AquaSeal™
    AquaSeal is Noble's NEWEST sheet membrane for interior waterproofing. Designed for bonded waterproofing applications in residential and commercial construction. At 16 mils, AquaSeal has superior performance characteristics vs its competitors....
     

  • AquaSeal™ is Noble Company's newest, thinnest waterproofing sheet membrane. This 16 mil ultra-thin sheet can be installed with modified thin-set mortar and offers superior bond performance and flexibility.  

    AquaSeal is available in three sizes (3'x33', 3'x100' and 6'x67') as well as a cap strip for seaming.  

    AquaSeal can be use in Residential Steam Showers and meets ANSI A118.12 crack isolation performance.  

  • PVC Shower Pan Liner: Cut-to-Length
    Noble Company now offers PVC pan liner in cut-to-length rolls. This makes it easy for a customer to grab and go and also easy for a distributor in not having to have someone cut from a master roll....
     

  • Convenience, easy-in and easy-out, and touch-free service are all things that have become popular over the last couple of years.  To that end, Noble Company is now making it easy to purchase PVC for a shower pan.  Most common sizes can be accomodated by the three different cut-to-length rolls being offering (5'x6', 5'x8' and 6'x10').

    These rolls are supplied in a poly bag to protect the product during handling.  In addition, the product is rolled - not folded.  Folding this membrane into a smaller package leaves residual creases in the membrane which can lead to water not being able to escape the shower system.  

  • Solutions Linear Drains
    Solutions Linear Drains adds Style and Function to a tile or stone shower installation. Can be combined with other Noble Company products to create a system solution....
     

  • Solutions Linear Drains offer an attractive finish at a competitive price.

    These are available in 24",  32", 36", 42", 48", 54" and 60" lengths. The strainer is offered in a slotted, triangle or tile in options, with the following finishes:  Stainless, Oil Rubbed Bronze, Chrome and Flat Black.  

    These drains can be installed in both a full mortar bed installation as well as a thin-bed installation.  

For technical assistance with this webpage please click here. For all other inquiries, please contact show management.