April 5-8, 2022 | Las Vegas, Nevada USA

Online New Product Gallery

By submitting a product for the gallery, your company consents to the terms below. 

Terms:

Products must qualify as new as defined below:

A product qualifies as new if it is manufactured or exclusively distributed by a company and was introduced to the marketplace since January 2021.

OFFICIAL RULES

Set forth below are a list of rules (the “Rules”) applicable to the Online New Product Gallery being sponsored by International Tile Exposition, a joint venture t/a Coverings (“Coverings”). By submitting any materials to Coverings for use with respect to the Online New Product Gallery (the “Materials”), you acknowledge and agree to each of the following terms:

You must be a Coverings 2022 exhibitor to enter new products in the Online New Product Gallery. If you submit more than one product into the online gallery, all rules below apply to all product entries.

The product must be new in 2021. “New” means the product must have been first sold at any level of distribution since January 1, 2021. All new product entries are subject to approval. Coverings reserves the right to remove/disqualify any product that it believes does not qualify as new.

The number of product submissions per exhibitor is limited to (7) seven.

There is no entry fee to submit a product for the Online New Product Gallery.

The Online New Product Gallery will be available online on the website and mobile app.

Coverings may in its sole discretion elect not to include a product in its 2022 Online New Product Gallery.

You grant a perpetual royalty free license to Coverings for the use of the Materials as part of the Online New Product Gallery.

Coverings may make any stylistic edits to submission entries that it deems to be appropriate, in its commercially reasonable judgement.

Any legal dispute relating to these Rules or the Online New Product Gallery will be resolved by Arbitration in Arlington, Virginia before a single arbitrator under the Commercial Arbitration Rules of the American Arbitration Association.

In no event shall the aggregate liability of Coverings to you with respect to the Online New Product Showcase exceed $500.00.

In no event shall any joint venture member of Coverings have any direct liability to you with respect to the Online New Product Gallery with your recourse being limited solely to the assets of Coverings.

Breton

Sarasota,  FL 
United States
https://www.bretonusa.com/en/
  • Booth: N912


Pioneer in the development of advanced tech and materials

Breton – a pioneering developer of advanced technologies and materials – is an international leader in the design and production of state-of-the-art industrial machinery and systems to create and transform natural stone, ceramics, metals and in the development of engineered stone plants.

Founded in 1963 by Marcello Toncelli, with headquarters in Treviso (Castello di Godego), two other production sites in Italy and six foreign branches (USA, Australia, India, China, UK, Brazil), the company is recognized worldwide thanks to its philosophy always aimed at research.

BRETON SOLUTIONS FOR FABSHOP

 BRETON COMBI 

Breton Combi is the advanced 5-axis monoblock saw blade & waterjet combined machining center, able to perform a wide range of slab processing, even ultra-thin ones.

Discover more → 

 BRETON GENYA 

Breton Genya is the most advanced, monoblock and 5-axis working centre for cutting, drilling and optimizing slabs.

Discover more → 

 BRETON WINGER 

Breton Winger is the kitchen countertop cnc working center in marble, granite, engineered stone or ceramic.

Discover more → 

 BRETON KINGER 

Breton Kinger is the advanced horizontal straight edge polisher, equipped with slat conveyor system, for edging pieces in marble, granite, engineered stone, Lapitec or ceramic.

Discover more →

 BRETON SPEEDX 

Breton SpeedX is the advanced 5-axis cnc machining center for cutting big thickness pieces in marble and granite.

Discover more →

 BRETON VERTIKA 

Breton Vertika is the smart vertical storage system for slabs in marble, granite, engineered stone, Lapitec or ceramic. 

Discover more →

Brands: Breton Genya, Breton Winger, Breton Combi, Breton Kinger, Breton SpeedX, Breton Vertika, Bretonstone plants


 Videos

Breton Corporate - Tracing new lines

 Products

  • BRETON KINGER
    Breton Kinger is the advanced horizontal straight edge polisher, equipped with slat conveyor system, for edging pieces in marble, granite, engineered stone, Lapitec or ceramic....
     

  • ​With its sturdy spindles, special rubberized roller conveyor and wide range of available accessories, Kinger is the edge polisher best suited for the marble worker’s laboratory.

    Kinger allows creating both beveled and jointed edges, on a single edge or on both, it allows to calibrate the front back band of the piece and to polish perfectly the edge.

    Discover more →

  • BRETON GENYA SWITCH
    Breton Genya Switch is the advanced 5-axis monoblock cnc machining center with by-pass feeding, ideal for cutting, profiling, drilling and finishing slabs. ...
     

  • This machining center combines all the advantages of Genya cutting performance with an automatic platform exchange system that allows to considerably reduce downtimes and to have a single operator following the working phases.
    In this way, while the spindle is working, the operator can proceed with all the loading, acquisition and programming operations for the next slab cutting.

    Discover more → 

  • BRETON COMBI
    Breton Combi is the advanced 5-axis monoblock saw blade & waterjet combined machining center, able to perform a wide range of slab processing, even ultra-thin ones....

  • The efficient use of the saw blade or the waterjet system guarantees waste minimization and vertical, inclined rectilinear and/or curvilinear cuts.

    With the addition of the new accessories, Optima and Rocket Tool, Combi becomes the most complete working center for slab processing.

    Discover more → 

  • BRETON VERTIKA
    Breton Vertika is the smart vertical storage system for slabs in marble, granite, engineered stone, Lapitec or ceramic....
     

  • Taking advantage of the opening and packing system, it allows a large number of slabs to be stored in small spaces. Creating space, increasing warehouse capacity, diversifying the array of stored items, and making material easily accessible has never been so easy. 

    Discover more →

  • BRETON SPEEDX
    Breton SpeedX is the advanced 5-axis cnc machining center for cutting big thickness pieces in marble and granite....
     

  • Thanks to Optima, the system of Breton vacuum cups positioned on the back of the spindle, and to the Breton Touch software, SpeedX is able to maximize the working surface of the slab, thus reducing waste.

    Discover more →

For technical assistance with this webpage please click here. For all other inquiries, please contact show management.